Taking care of green areas – For excavators from 1,5 to 12 tons
HTE60LT DA CATALOGOHTE-LT-RENDERING

STANDARD SET WITH FEELER ROLLER
HTE LT (60/80/100 cm) To cut up grass, brambles, brooms and shrubs up to ø 5 cm

  • Direct transmission
  • Adjustable feeler roller on 3 positions
  • Helical rotor with knives or hammers
  • Valve block with anti cavitation, pressure and flow regulation, engine drain input
  • Gears engine group 2 with drain and reinforced oil seal

 

Efficient cut, fast cleaning.

Our hydraulic mulchers can be installed on excavators from 1,5 to 12 tons according to the oil pump technical characteristics and to excavator lifting capacity.
All models are equipped with an internal double metal sheet to increase resistance and avoid damages to the external structure due to rocks.

The helical rotors of our mulchers are solid, perfectly balanced and supported by high quality supports and bearings. On the machine head there’s a metal plate for the fastening of the excavator joint.

ModelCut widthWeightOil flowMaximum pressureExcavator weight
HTE 60 LT60 cm130 kg15 - 35 l /min170 - 220 bar1,5 - 3,0 ton
HTE 80 LT80 cm150 kg28 - 35 l /min170 - 220 bar2,0 - 4,0 ton
HTE 100 LT100 cm190 kg35 - 50 l /min170 - 220 bar4,0 - 6,0 ton

 

hterevREVERSIBLE SET WITH SIDE SKIDS
HTE REV (60/80/100 cm)
To cut up grass, brambles, brooms and shrubs up to ø 10 cm

  • Toothed high performance V-belts transmission
  • Adjustable skids on 3 positions
  • Helicoidally rotor with tempered sticks
  • Valve block with anti cavitation, pressure and flow regulation, engine drain input
  • Gears engine group 2/3 with drain and reinforced oil seal

Smart hydraulic management

The valve bloc installed on our mulchers permits to avoid the predisposition to an additional hydraulic line (drain) for the unloading of pressure picks. In addition to that, being able to regulate pressure and oil flow, it will possible to prepare the mulcher for your needs and the needs of your excavator.

Overall the priority valve helps to permit movements with your excavator without an excessive drop of pressure of your mulcher that would not allow to work properly.

ModelCut widthWeightOil flowMaximum pressureExcavator weight
HTE 60 REV600 mm180 Kg20 - 25 l/min170 220 bar2,5 - 4,0 ton
HTE 80 REV800 mm245 Kg20 - 25 l/min170 220 bar4,0 - 6,0 ton
HTE 80 REV G3800 mm260 Kg40 - 50 - 60 l/min170 220 bar6,0 - 8,0 ton
HTE 80 REV FOREST800 mm300 Kg40 - 50 - 60 l/min200 - 220 bar6,0 - 8,0 ton
HTE 100 REV1000 mm310 Kg40 - 50 - 60 - 80 - 90 l/min200 - 220 bar6,0 - 12,0 ton
HTE 100 REV FOREST1000 mm360 Kg40 - 50 - 60 - 80 - 90 l/min200 - 220 bar6,0 - 12,0 ton